Home Projects

Our Home is Our Castle

As I am sure is true for every home owner there is always something to fix, tweak, improve on a house when you are a homeowner.  I'm not including those immediate or emergency things that happen.  Just the things that need improvement.  For example, when we were purchasing the house we had someone inspect the house (@Ron_Gerome)  as is typical.  He found that while we had a whole new breaker box which was clean, well done, at grounded, our other items (water heater, furnace, gas) were not grounded.  Not anything ground breaking but not something that you want to let go forever, particularly since it's "not up to code".  So we have begun the process of getting estimates for these items plus those items that we have noticed we want or have "broken" in the meantime.  For example, Arisa and George did something so now the kitchen sink faucet drips non-stop.  It'll probably be a 10 minute job for a plumber.  So we'll get the estimate for:

1. Electrical (done today)
2. Plumbing
3. Furnace and AC Check
4. Masonry (tuckpoint work)
5. Chimney Sweep (probably not this year)
6. Minimal Roofing Repair (not this year)

This Year's Challenge

As I mentioned in my New Year's post, last year I was able to successfully quit smoking. However, it did come at a price - I gained 30 pounds. Since coming back from Japan and prior to quitting smoking I had already put on 20-30 pounds. So that's about 60 pounds in 5 or 6 years. That's pretty bad.

Now, the reality of it is that the last 30 pounds is what really made it bad. That gain in weight was a direct result of quitting something that is even more dangerous and damaging to my health - smoking. Last year, I knew I was gaining weight and eating more "snacks". I made a conscious decision to not worry about it until this year, or rather after a full year of not smoking. I completed that full year so it is time for this year's challenge.

Happy New Year! 明けましておめでとうございます

Happy New Year! 明けましておめでとうございます

Neohawk's New Homestead

Most of you know that the Northeast Ohio Hawkins Family moved to a new house at the end of June.  For the first time ever, Arisa and I have purchased a house!

Our new homestead is only 5 or 10 minutes away from our previous residence, so George will be attending the same school - Mayfield High School.  We did move to a new city though and we are now in Highland Heights, but Mayfield City School District includes both Mayfields (Heights and Village), Gates Mills and Highland Heights.  The house is about a 5-10 minute bike ride to and from the school.

The house is not that much bigger than the house we were in previously, but the layout is much, much better.  The house overall is in much better shape and incredibly higher quality of any house we've lived in so far.  We bought it with the idea that it'll be really for just Arisa and I as we'll be empty nesters soon.  George has three more years of high school, but beginning this fall both Ken and Elly will spend most of their lives away from home.  Elly, of course, is a sophomore at American University while Ken is a freshman at Villanova University.

While the house isn't that big we have close to one and a half acres (約6000平方メートル). Which for me means alot of gardening space.  As you know, in our previous residence we did some gardening.  Unfortunately, last year I was traveling too much to take much care of it and this year too much flooding to even start.  And then when it dried up some we had already decided to move so I never did plant a garden this year regardless of this post that indicates otherwise.

This summer for me was mostly be about planning and preparing for next year.  I will be planting at least two gardens and a third one eventually.  For the most part, these will be vegetable gardens, though I may throw in some flowers for variety.  In fact, we have a little "hill" that's up against the Euclid Creek where I am planting some native flowers such as the purple cone flower and some others.  Hopefully, these flowers will fill up the area instead of the weeds that were there until Elly and I ripped them out.   In addition to this area, I will be building a raised garden in front of our shed. The plan is for it to be fairly big but we are building it in halves. The first half I'll do this fall, the second half next fall. There is no reason to rush any of this since we'll be here for a while (knock on wood).

One of the big things we need to figure out is what trees to cut down and/or trim. There are three maples next to the house that need to go as they are pushing up against the foundations and will probably cause leaks. We also have two beautiful but massive oak trees in the yard. Both 50 - 70 years old. Unfortunately between the two of them they pretty much shade the whole yard making it very difficult to figure out where to put gardens. But it is more than that - we have probably 6 maples other than the first three I mentioned, 3 pines, another oak tree, an ash tree, a hickory tree and some spruce/evergreen trees and shrubs. Oh, and a dying cherry tree.

I intend to cut down some myself, others we are debating to keep them and, therefore, only trim them. Others we just aren't sure we want to pay to cut them down. So it's a problem we're trying to figure out. And in the meantime I am dreading the fall when all these trees shed their leaves.....

That's enough for now for this post as it has already taken me close to two months to write it. Time to get it out of the way and move on.

Neohawk.Org Down

www.neohawk.org is currently down.

@grokthis: The SAN filer crash appears to be non-trivial. Recovery efforts are underway. Service is not expected to be restored in fewer than 12 hrs

It'll be up when it's up. That was from 5-6 hours ago.

Powered by ScribeFire.

Damn You Byteflow!

U5AA7KUEJQ7U

As many of you know, I've been using Byteflow for this site and blog. Byteflow is a blog system built in Django. The glorious design(sarcasm) is mine. I should also add that the News and Links are little modules that I created. Which I'm pretty proud of as I'm not a programmer/coder, and even though they are real simple and pretty featureless (no RSS for example).

That's one of the things I like Byteflow, which is really a blog system, is that I can build other "apps" and include it into the blog to make it a "cms". And Django is fairly easy to get your head around to do so, at least for the easy stuff.

Anyway, as I posted in "New URL", I was planning to move everything over to Google, particularly the blog over to blogger - this one in particular: robataka.neohawk.org. For one reason, it's free. Free as in no charge, not the FLOSS free. It was a cost saving measure as I run this site one a vps, from VPS Village. Now it's not terribly expensive, in fact it's inexpensive. I'm sure I might find even cheaper ones. But if I'm going to move my site for cost reasons, it'll be to free rather than for just less money.

More importantly though, I was going to switch simply because it was easier to post to blogger than it was to a Byteflow blog. My number one "complaint" or dissatisfaction with Byteflow was simply the inability to post to my blog via ScribeFire (what I'm using now) or other blog editor/tool. I always had to go in via the web admin interface. Where as with Google's blogger, I could use a blog tool like ScribeFire to post to it. It just makes it easier to post which means I'll post more often. Or that's the idea anyway.

So here I was getting ready to move. I updated my dns so that you could see robataka.neohawk.org, and I posted all of the entries from here to my blogger blog. I was playing around with Google Sites (useless for my current needs), App Engine Site Creator (cool, and usable, but just not quite right for this - I do use it elsewhere). But I was going to bite the bullet since every decision involves trade offs. I'd be getting a blog that's easier to post to, but a weaker solution for non-blog stuff. And less control, or more work really, to control the look and feel of the site.

So what do the developers of Byteflow do? They fix Byteflow so it now can handle the MetaWeblog API, and therefore using blog editing tools like ScribeFire(apparently Echto works too). Damn you! Stop making Byteflow so usable!

So now I'm back to using Byteflow at least for the foreseeable future. I may end up posting in both blogs until I finally make up my mind. But for now, Byteflow wins again.

Damn you Byteflow!

Technorati Tags: byteflow, django, blogger, google

New URL

You may or may not have noticed but this blog is now available at a new url: http://robataka.neohawk.org.  Please note that if you are seeing this post, you are at the new url.
If your not seeing this post, well there's really nothing to say since you're not reading this.  In other words, the dns is still updating.

This is part of getting ready to move everything off of my current server to something else.  The neohawk.org blog will come here, though it is still currently live.
So if you following along with an RSS reader, you'll need to update it.  I'll post again when I take the other one down.

Switched to Disqus

I am trying out Disqus for comments on the blog.

Disqus Comments is a comment system and moderation tool for your site. This service lets you add next-gen community management and social web integrations to any site on any platform. Hundreds of thousands of sites, from small blogs to large publications, rely on Disqus Comments for their discussion communities.

Perhaps this is easier than the built in one. We'll see...or maybe not since nobody comments on my blog anyway...

If I decide I like it, I'll clean up the template to remove the default comment stuff.

Google Connect for Comments

For the time being, nevermind. It didn't work like I thought it would.

I am trying something new on this blog. I am giving Google Connect a go for commenting. I have also added a "social bar" on the right side of the blog, but that was really part of my testing to make sure that Google Connect was working.

This site is powered mostly by Byteflow with some minor code added by me (news and links), and a couple other pieces of Django code/modules. But I wanted to give Google connect a try. With Byteflow, in order to comment you need to register with this site either with an OpenID account or a email address and password. I'm pleased with the OpenID support, but not many people actually know what it is. They do know their google, aim, or yahoo accounts and can use those to register and then comment.

Of course, there actually needs to be somebody reading this blog before any comments are going to happen. But I know I'm talking to myself here in the ether. But I think this may be easier in the long run.

I'll need to tidy up my templates since there is still some stuff left over from the byteflow templates. I'll need to nix those when I get around to it.

Speaking of Which

Yesterday, I posted about City Websites. Today, it's about this website. As some of you have noticed, I brought down my Planets, Planet NEO and Neohawk IT. I did this mostly for time and money reasons. The server they are running on is memory challenged and Planet NEO in particular was getting very large, memory consumption wise. It had over 50,000 posts archived. So it kept crashing, and I was spending more time trying to keep it up than I want.